Technical Document of Y55115 Rotary Kiln
Technical Document of Y55115 Rotary Kiln

Technical Document of Y55115 Rotary Kiln

Description: Equipment name: Rotary kiln
Specification and type: Φ5.5×115m(Diameter is the inner diameter of steel plate cylinder)
Application: Used for reduction roasting of laterite
Drive system: Double drive
Wheel type: Two speed hydraulic block wheel

TECHNICAL DOCUMENT OF Y55115 ROTARY KILN

Technical

Name

Unit

Description

Equipment name

 

Rotary kiln

Specification and type

 

Φ5.5×115m(Diameter is the inner diameter of steel plate cylinder)

Application

 

Used for reduction roasting of laterite

Number

台

1

Output

t/h

80~100(焙砂)

Drive system

 

Double drive

Wheel type

 

Two speed hydraulic block wheel

Kiln support number

 

4档

Inclination  (sine)

 

3.0%(sine)

Rotation speed

 

 

Drive type

 

Double side double drive

Main drive

r/min

0.2~1.2

Auxiliary drive

r/h

6.7

Sealing type of kiln head

 

Tentative steel seal (to be determined after consultation with ENFI)

Sealing type of kiln tail

 

Tentative air cylinder compression face seal (to be determined after consultation with ENFI)

Cooling of kiln head

 

Air cooling

Rotation direction

 

Forward time (from discharge end)

Total weight

t

1648(Excluding inlet and outlet cover)

Outlet temperature of kiln head materials

℃

750~850

Temperature of kiln tail gas

℃

200~400

Thickness of refractory brick

mm

230

Coal injection quantity at kiln head

t/h

 

Scope of supply

Including transmission device (main transmission device, auxiliary transmission device), open gear transmission device (large and small gear rings, shafts and bearings), gear cover, cylinder part (cylinder section, kiln head cold air sleeve, kiln head guard plate, bolt and nut, each wheel belt), support device (each block support, base, etc.), hydraulic block wheel (block wheel, shaft and bearing), block wheel hydraulic station, block wheel pipeline system System, kiln head sealing device, kiln tail sealing device, kiln head cooling air pipe, reducer lubrication system, feed cover, discharge cover, installation tools, various instruments, electric control cabinet, etc.